Electrical Line RSS Feed GTI’s New CHP & Renewable Energy Laboratory Increases Solar Thermal R&D Opportunities

    Gas Technology Institute (GTI) recently announced the opening of its Combined Heat and Power (CHP) & Renewable Energy Laboratory to provide greater capabilities for developing a wide variety of highly efficient, environmentally friendly renewable energy technologies such as solar thermal products.

    “The advancement of renewable energy is crucial to reducing the demand for conventional fossil fuels while also reducing carbon emissions,” says Bill Liss, Managing Director, End Use Solutions. “A key challenge, however, is integrating renewable energy solutions – such as solar thermal – in a cost-effective way for homes, commercial businesses, and manufacturing facilities. We’re addressing these challenges, with a goal of bringing practical, clean, high-efficiency hybrid solar thermal energy technologies to the residential, commercial, and industrial sectors.”

    The facility, located at GTI’s 18-acre site in Des Plaines, Illinois, contains multiple types of low- to medium-temperature solar thermal technologies and associated end use equipment such as tank and tankless natural gas water heaters, boilers, space conditioning equipment and other technologies that can enable investigation of integrated or hybrid energy systems using solar thermal.

    GTI’s Solar Thermal R&D portfolio focuses on advancements of traditional lower-temperature solar thermal (less than 200°F) for hot water or space heating, and newer higher-temperature (over 200°F) systems that can be used for steam generation, absorption cooling, process heating, and other value-added uses.

    “Solar thermal water heating technology has been around for more than a century,” continues Liss. “However, innovative processes are breathing new life into this technology. When coupled with the most advanced natural gas water heating systems and the latest computer controls, new solar thermal energy solutions are creating a very dynamic and reliable renewable application.” Liss adds that advanced “hybrid systems” – which use solar thermal energy along with natural gas or propane – can reduce energy consumption by up to 40% – with lower capital and installation costs.

    Under sponsorship from Utilization Technology Development (UTD), a residential hybrid gas-solar hot water system that will reduce materials, manufacturing, and installation costs for these systems is being developed. GTI is working with partners and gas utilities to expand the pathway for bringing affordable hybrid solar thermal/natural gas systems to the residential market.

    Applications that use higher-temperature solar thermal energy are also being addressed. The organization is teaming with partner companies on a solar thermal technology based on an evacuated tube solar collector that can be used for a wide variety of compelling heat-driven industrial/commercial process applications, including boiler feedwater, absorption chilling, and industrial drying.

    “We have a long history of developing innovative end use technologies and partnering with manufacturers and industry to bring them to market,” concludes Dan Willems, GTI’s Industrial R&D Director. “Our new laboratory offers the ability to more easily develop, integrate and test solar thermal technologies to build on the momentum of this fast-growing renewable energy sector.”

    About Gas Technology Institute (GTI)
    GTI is a leading research, development and training organization that has been addressing the nation’s energy and environmental challenges by developing technology-based solutions for consumers, industry, and government for more than 65 years. Website: www.gastechnology.org

    Electrical Line RSS Feed Industry News

    Showing 1 - 4 of 819 Industry News.

     

    • January 30, 2012

      ABB, a leading power and automation technology group, and Thomas & Betts Corporation, a North American leader in low voltage products, announced that both companies’ boards of directors have agreed to a transaction in which ABB will acquire Thomas & Betts for $72 per share in cash or approximately $3.9 billion.

      The acquisition price represents a 24 percent premium to Thomas & Betts’ closing stock price on Jan. 27, 2012 and a 35 percent premium to the volume weighted average stock price over the past 60 trading days. The transaction is subject to approval by Thomas & Betts shareholders as well as to customary regulatory approvals, and is expected to close by the middle of 2012.

      The complementary combination of Thomas & Betts’ electrical components and AB...

    • January 30, 2012

      Siemens has entered into an agreement with RuggedCom Inc. to acquire all of the issued and outstanding common shares of RuggedCom by way of a friendly, board-supported takeover bid. The Canadian company listed on the Toronto Stock Exchange is a leading provider of communications and networking solutions for harsh industrial environments. The takeover bid is for C$33.00 per common share in cash, or a total transaction value of approximately C$382 million. RuggedCom's Board of Directors has unanimously determined to support, and to recommend that RuggedCom's shareholders accept the offer. Subject to the satisfaction or waiver of certain limited conditions, Siemens expects to take up shares under the offer in the second half of March 2012.

      With annual revenues of approximately US$94...

    • January 27, 2012

      Ballard Power Systems has announced signing of a non-binding Memorandum of Understanding (MOU) with Tata Motors (India) for 12 FCvelocity™-1100 fuel cell stacks. These stacks are expected to power zero-emission buses planned for demonstration in various Indian cities. Delivery to Tata Motors is planned for 2012 and 2013, in-line with that Company's plans.

      Tata Motors, one of the world's largest bus OEM's, displayed the first fuel cell bus built in India at "Auto Expo 2012" held in New Delhi January 6-11, 2012. The bus is powered with a Ballard FCvelocity™-1100 fuel cell stack, previously delivered to Tata Motors in 2011.

      Mr. P.M. Telang, Managing Director (India Operations) at Tata Motors said, "We strive to be leaders in the use of technology, while main...

    • January 26, 2012

      The MEET (Mechanical Electrical Electronic Technology) Show is set to open in Moncton, May 2-3. This biennial event attracts exhibitors from all over Canada and the US, displaying the very latest equipment available to the mechanical and electrical industries.

      MEET has proven itself to be one of the top industry events in Canada. Acting as a comprehensive marketplace, this show gives industry professionals the unique opportunity to see mechanical and electrical companies from across North America under one roof.

      MEET is the second largest event for industry in Canada and the largest trade event east of Montreal. The economic impact for Moncton is significant given that the majority of exhibitors come from outside the local area. The last edition of MEET in 2010 welcome...

    Electrical Line RSS Feed Keeping Current

    Showing 1 - 4 of 299 Keeping Current.

     

    • February 1, 2012

      GE ENERGY INDUSTRIAL SOLUTIONS announces the appointment of Adrian Thomas as the new Regional Sales Leader responsible for driving sales of electrification products across Canada. Dale Wilson, Global Sales Leader for GE Energy’s Industrial Solutions business says the company has a dedicated sales organization of 60 experienced professionals and Adrian will bring strong...

    • January 31, 2012

      LIND EQUIPMENT announces the appointment of ElectriXwest Agencies Ltd. as its electrical sales agent in Alberta. ElectriXwest Agencies will continue to build Lind Equipment’s presence in Alberta and serve electrical distributors’ demands for high quality, fairly priced portable electrical equipment for the toughest workplaces. With a combination of outside sales to demonstrate Lind’s products to end-users and distributors, and a strong background in technical specification to work with engineers, ElectriXwest is well poised to help Alberta to work confidently with Lind Equipment’s products. Brian Astl, VP Sales for Lind Equipment said the well-trained, attentive sales representatives in Edmonton and Calgary makes for an excellent platform from which to...

    • January 25, 2012

      IDEAL INDUSTRIES NETWORKS, the networking division of IDEAL Industries, Inc., one of the world's largest manufacturers of LAN Test and Measurement products that improve the quality and lower the cost of data communication, has appointed Mark Barmettler as its new Director of Engineering in the US. Barmettler brings over a quarter century of engineering and...

    • January 23, 2012

      SOMMERS MOTOR GENERATOR SALES LTD. announces its expansion to a new Atlantic Canada headquarters at 707 Malenfant Blvd. Dieppe, New Brunwick. Sommers designs and builds customized standby, PTO and off-grid generator power solutions and is the leading Canadian manufacturer of packaged generator systems for residential, commercial and industrial applications. It maintains the country’s largest privately held inventory of generators for sale or rent from 3 kW to 2 MW. Established in Tavistock, Ontario, in 1936, Sommers has been a trusted name in generating, delivering and applying electrical power for three generations.

      Chris McGregor, Sommers General Manager and Vice President Sales & Business Development, explains that, “We chose Dieppe as...

    Electrical Line RSS Feed Upcoming Events

    • 1

    Electrical Line RSS Feed Career Opportunities

     
    • 1

    Electrical Line RSS Feed Product Safety Alert!

    View the latest safety alerts on recalled and counterfeit products:

     

    Electrical Line RSS Feed EL Newswire

    Electricalline Newswire
    Keep up-to-date with the latest news affecting your industry, personnel appointments, career opportunities, upcoming events and new product launches by subscribing to EL Newswire.
    Email:

    Electrical Line RSS Feed Ask the Expert

    Having trouble finding answers? Let our industry experts provide answers to your questions. Submit your question here.

    Below are answers to some recently asked questions:

     

    Electrical Line RSS Feed Product Showcase

    Showing 1 - 3 of 503 results.
    • January 30, 2012

      Ideal for various process and water related industries, Hammond Manufacturing’s HN4_SS series of stainless steel two door cabinets are robust units that can be mounted on walls or equipment. Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments installed in harsh or aggressive industrial environments, the HN4_SS range is available as standard in 12 different sizes ranging...

      read more
    • January 27, 2012

      A new high-speed data-capture option has been introduced for the Yokogawa WT1800 precision power analyzer.

      The new /HS option provides fast, accurate measurements of power parameters such as voltage, current, power, torque, speed and mechanical power with millisecond response. This allows it to capture numeric data on the change of status during one rotation of a motor when the motor is started,...

      read more
    • January 26, 2012

      WattStopper has introduced the rugged FSP-211 Digital High/Low Passive Infrared Fixture Integrated Outdoor Sensor to conveniently control lighting in areas such as parking facilities, gas stations, pedestrian pathways and warehouses. The sensor, which was accepted into the prestigious 2011 IES Progress Report, mounts in a lighting fixture and provides motion-based multi-level control combined with...

      read more


    Browse Virtual Issues

    * mouse over magazine cover for issue identification


    Electrical Line RSS Feed Google Adsense